Care Of This Item

Maintaining the frame and fittings 1. Hose mast and frame with water periodically, more often if installation is in a salty or industrial environment. 2. Inspect the installation fitting, mount bolts, rib spacers, etc. on a regular basis and tighten if necessary. Maintaining the shademaker canopy fabric 1. Clean up spills and stains right away. Spills can be removed by using a clean absorbent cloth. 2. For general maintenance, use a soft brush to remove dust and dry soil. Wash down with clean, warm water (i.e., garden hose) every so often to avoid dirt becoming ingrained. Allow the fabric to air dry before closing the canopy. 3. If a thorough cleaning is necessary, sponge over the fabric using a mild soap solution (2% solution). Rinse well with plenty of water to remove all soap residue. 4. Never use detergents, cleaning fluids or solvents. Grease and oil stains may be removed by using turpentine or similar with an absorbent cloth. 5. Please visit the fabric websites for more details: Sunbrella 6. Use protective canopy cover during storage or when not in use.

Warranty

5 Year Limited Warranty. This includes the mast, boom, head fitting, elbow, center pole/sidepost, arms, ribs, upper and lower hub, and stainless steel hardware only. If there is damage under the warranty, the manufacturer will replace and/or repair any item listed in this category at its discretion. Labor charges are not covered under this limited warranty. 10 Year Limited Warranty includes the Sunbrella® awning grade Fabric Collection. Visit www.sunbrella.com/warranty for more details. Labor charges are not covered under this limited warranty. Exclusions: Wind damage, acts of nature (such as, but not limited to, freezing or any type of extreme weather). Failures caused by abusive use and normal wear and tear are not covered under this warranty. Any Jaxson style that does not have spacer buttons installed. Caution: Seaside and indoor pool use, salt & chlorides can accumulate on the powder coat finish, leading to finish failure. Failure or neglect to make needed cleanings may cause paint to blister, and such failure will void limited warranty. NOTE: Wind damage is not covered under any manufacturer’s warranty.